Study on the Preparation Process of Colloidal Gas Aphrons
CHEN Xiaolu, HE Xiujuan, CUI Leyu, LI Yingcheng
Sinopec Key Laboratory of Surfactants for Enhanced Oil Recovery, SINOPEC Shanghai Research Institute of Petrochemical Technology Company Limited, Shanghai 201208, China
Abstract Recently, colloidal gas aphron (CGA) fluids have been much attended by researchers for their possible applications in various fields. In this study, polyether zwitterionic surfactant and xanthan gum polymer were utilized to generate CGA fluids. The average bubble size and size distribution of CGAs prepared under different conditions were compared and analyzed by using optical photographic technique, so as to determine an optimum preparation condition. Results showed that CGA fluids with bubble size less than 100 μm could not be obtained by conventional mechanical agitation. The base fluid volume of 300 mL, stirring rate of 3 000 r/min and stirring time of 3 min were found to be optimum conditions for the preparation of CGA fluids by the Waring-Blender method. In this condition, CGA fluid with acceptable stability and fine and uniform bubbles was obtained. It showed a narrow size distribution with an average bubble size of 62 μm.
CHEN Xiaolu,HE Xiujuan,CUI Leyu et al. Study on the Preparation Process of Colloidal Gas Aphrons[J]. Chemical Reaction Engineering and Technology, 2024, 40(4): 377-384.
CHEN Xiaolu,HE Xiujuan,CUI Leyu et al. Study on the Preparation Process of Colloidal Gas Aphrons[J]. Chemical Reaction Engineering and Technology, 2024, 40(4): 377-384.
